Tilt
Product overview
is a systemic fungicide that contains active ingredients from the "triazoles" group that have a broad spectrum and act protectively and curatively.
Application Rate
| Crop | Disease | Pesticide Rate | Note | PHI | |
|---|---|---|---|---|---|
| 10 Liter Water | Per Hectare | ||||
| Cocoa (Seedling stage) | Dieback (Oncobasidium theobromae) | 400 ml | - | As a spray: Mix 40 ml Tilt in 1 litre of water with 2.5% white oil and spray the trunk of the tree 5-10 cm wide. Repeat the treatment every month, if there are signs of infestation. | - |
| 4 ml | - | As a spray: Pour the solution around the trees using 100 ml of solution for each tree. Repeat the treatment every month, if there are signs of infestation. | |||
| Banana | Black Sigatoka (Mycosphaerella musicola) | 44 ml | 400 ml | Regular Spray: Use 0.4 litres of Tilt mixed with 5 litres of mineral oil per hectare. Spray at the beginning of the rainy season every 3 weeks up to a maximum of 6-8 times. Then switch to another fungicide that is protective or divide this 6-8 sprays into 3-4 times alternating with fungicides from different groups that have different modes of action. In the dry season, switch to a protective fungicide. | 30 days |
| 200 ml | 400 ml | Aerial spray: Use 0.4 litres of Tilt in 20 litres of water (mixed with 10 litres of mineral oil) per hectare. The method of application is the same as above. | |||
| Rubber | White Root Disease (Rigidoporus lignosus) | 75 ml | - | Rubber trees aged 1-3 years: Dig a groove (8 cm deep x 8 cm wide) around the base of the tree. Pour the fungicide solution into the groove using 1 liter of solution for each tree. Then cover the groove with soil. Check the base of the tree every 3 months and treat as soon as ‘Mycelia’ is detected at the base of the tree. | - |
Pink Disease (Corticium salmonicolor) | 67 ml | - | Rubber trees aged 3-5 years: Dig a groove (8 cm deep x 8 cm wide) around the base of the tree. The method of use is the same as above. | - | |
20 ml Tilt + & 50 ml Shell & Tenac sticker (pelekat) | - | Spray on the diseased part and 30 cm above and below the branch. 500 ml of spray is required for each tree. | |||
Usage Instructions:
• Use a maximum of 6 sprays per season for banana plants if there is little disease infestation and a maximum of 8 sprays per season if there is a severe disease infestation.
Mixing Guide:
Fill the tank half full with clean water. Mix thoroughly according to the recommendations set out in the dosing and mixing table. Then add the remaining clean water required and stir. Do not use at a rate higher than recommended. Do not store the remaining mixture in the sprayer tank.
Spraying Guide:
It is recommended to monitor the level of disease infestation at all times. Apply treatment when signs of disease begin to appear. If treatment needs to be repeated, alternate with fungicides from different groups that have different modes of action.
READ THE LABEL BEFORE USE